Profil treapta/capat negru pentru SPC si acoperiri subtiri H=6.2mm Novopeldano Mini

Materiale si dimensiuni

Profil fabricat din aluminiu eloxat rezistent la impact si la contactul cu substantele obisnuite de curatat. Garantia calitatii materiei prime este oferita de certificatele Qualanod si Qualicoat detinute de profilele din gama Emac.

Lungime L= 2.5m
Inaltime h= 6.2mm
Inaltime totala a= 15mm

Culoare: negru mat

Montaj

If you are going to install Novopeldaño® MINI with ceramic or coatings that are placed with adhesion material:
1. Spread a big amount of adhesive material on the surface of the riser 2. Place the coating pieces on the riser and press them to get an optimal adherence. 3. Then, spread a big amount of adhesive mortar on the tread and align the profile to its vertex so it rests on the riser (Do not let overhang, the leverage may remove the step and the tiles). Then press it to let the adhesive mortar pass through the holes of the anchoring wing. 4. Place a piece of coating on the tread, align it to the profile and press them to get a perfect adhesion. You can tap it softly with a rubber hammer 5. Clean the possible leftover material and let dry.
If you are going to install Novopeldaño® MINI with ceramic or coatings that are placed with adhesion material:
If you are going to do a dry installation, with vinyl type flooring for example, you can use the holes in the fixing wing to screw and fix the profile. Once the piece of the coating has been placed on the riser, align the profile, mark the position of the holes, drill and fix with the screws (not supplied). Then continue laying the coating.